articleTop 1% cited
Density of additively-manufactured, 316L SS parts using laser powder-bed fusion at powers up to 400 W
The International Journal of Advanced Manufacturing Technology · 2014 · Vol. 74(1-4) · pp. 65–78
Chandrika Kamath✉(Lawrence Livermore National Laboratory)Bassem S. El-Dasher(Lawrence Livermore National Laboratory)G. F. Gallegos(Lawrence Livermore National Laboratory)Wayne E. King(Lawrence Livermore National Laboratory)Aaron Sisto(Stanford University)
Additive Manufacturing Materials and ProcessesAdditive Manufacturing and 3D Printing TechnologiesLaser Material Processing TechniquesKeyholeMaterials scienceSelective laser meltingLaserFusionFuse (electrical)Power densityRelative densityLaser power scalingMetal powder
Citations
373
FWCI
20.45
field-weighted impact
References
14
Percentile
100%
vs. same field & year
Citations per year
Cited by
Steels in additive manufacturing: A review of their microstructure and properties
Materials Science and Engineering A · 2019 · 964 citations
Selective laser melting of stainless steel 316L with low porosity and high build rates
Materials & Design · 2016 · 692 citations
Revealing relationships between porosity, microstructure and mechanical properties of laser powder bed fusion 316L stainless steel through heat treatment
Materials & Design · 2020 · 331 citations
Texture control of 316L parts by modulation of the melt pool morphology in selective laser melting
Journal of Materials Processing Technology · 2018 · 403 citations
In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing
Materials & Design · 2017 · 386 citations
Additively manufactured hierarchical stainless steels with high strength and ductility
Nature Materials · 2017 · 2,440 citations
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
Materials & Design · 2016 · 722 citations
References
Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials
The International Journal of Advanced Manufacturing Technology · 2011 · 297 citations
Single track formation in selective laser melting of metal powders
Journal of Materials Processing Technology · 2010 · 808 citations
Citation Network
How this paper connects to the literature. Drag to explore, click any node to open that paper.