article Open AccessTop 1% cited
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
Materials & Design · 2016 · Vol. 113 · pp. 331–340
Umberto Scipioni Bertoli(University of California, Irvine)Alexander J. Wolfer(University of California, Davis)Manyalibo J. Matthews(Lawrence Livermore National Laboratory)Jean‐Pierre Delplanque(University of California, Davis)Julie M. Schoenung✉(University of California, Irvine)
Additive Manufacturing Materials and ProcessesAdditive Manufacturing and 3D Printing TechnologiesWelding Techniques and Residual StressesSelective laser meltingMaterials scienceDeposition (geology)ScalingRange (aeronautics)Laser power scalingMetric (unit)Reliability (semiconductor)Work (physics)Energy (signal processing)
Funding
- U.S. Department of Energy
- National Aeronautics and Space Administration
- Laboratory Directed Research and Development
- Lawrence Livermore National Laboratory
Citations
722
FWCI
28.27
field-weighted impact
References
36
Percentile
100%
vs. same field & year
Citations per year
Cited by
Texture control of 316L parts by modulation of the melt pool morphology in selective laser melting
Journal of Materials Processing Technology · 2018 · 403 citations
In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing
Materials & Design · 2017 · 386 citations
References
Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting
Materials & Design · 2015 · 897 citations
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
Journal of Materials Processing Technology · 2014 · 1,515 citations
Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting
The International Journal of Advanced Manufacturing Technology · 2014 · 735 citations
Single track formation in selective laser melting of metal powders
Journal of Materials Processing Technology · 2010 · 808 citations
The role of recoil pressure in energy balance during laser materials processing
Journal of Physics D Applied Physics · 1997 · 649 citations
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Acta Materialia · 2016 · 2,577 citations
Density of additively-manufactured, 316L SS parts using laser powder-bed fusion at powers up to 400 W
The International Journal of Advanced Manufacturing Technology · 2014 · 373 citations
Related articles
Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel
Journal of Materials Processing Technology · 2017 · 954 citations
Citation Network
How this paper connects to the literature. Drag to explore, click any node to open that paper.