Double-Gate Tunnel FET With High- Gate Dielectric

Abstract

In this paper, we propose and validate a novel design for a double-gate tunnel field-effect transistor (DG tunnel FET), for which the simulations show significant improvements compared with single-gate devices using a gate dielectric. For the first time, DG tunnel FET devices, which are using a high-gate dielectric, are explored using realistic design parameters, showing an on-current as high as 0.23 mA for a gate voltage of 1.8 V, an off-current of less than 1 fA (neglecting gate leakage), an improved average subthreshold swing of 57 mV/dec, and a minimum point slope of 11 mV/dec. The 2D nature of tunnel FET current flow is studied, demonstrating that the current is not confined to a channel at the gate-dielectric surface. When varying temperature, tunnel FETs with a high-kappa gate dielectric have a smaller threshold voltage shift than those using SiO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> , while the subthreshold slope for fixed values of V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">g</sub> remains nearly unchanged, in contrast with the traditional MOSFET. Moreover, an I <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">on</sub> /I <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">off</sub> ratio of more than 2 times 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">11</sup> is shown for simulated devices with a gate length (over the intrinsic region) of 50 nm, which indicates that the tunnel FET is a promising candidate to achieve better-than-ITRS low-standby-power switch performance.