Determining the longitudinal relaxation time (<i>T</i><sub>1</sub>) of blood at 3.0 Tesla
Abstract
It is important to determine the longitudinal relaxation time of blood for black blood imaging, as well as for quantifying blood flow by arterial spin labeling (ASL). In this study a circulation system was used to measure blood T1 under physiological conditions at the new clinical field strength of 3.0T. It was found that 1/T1 in s(-1) was linearly dependent (P < 0.05) on hematocrit (Hct) within a normal range of 0.38-0.46. The relationships were 1/T1 = (0.52 +/- 0.15). Hct + (0.38 +/- 0.06) and 1/T1 = (0.83 +/- 0.07). Hct + (0.28 +/- 0.03) for arterial (oxygenation = 92% +/- 7%) and venous blood (69% +/- 8%), respectively, which led to estimated T1 values of 1664 +/- 14 ms (arterial) and 1584 +/- 5 ms (venous) at a typical human Hct of 0.42. The temperature dependencies of blood T1 were 22.3 +/- 0.6 ms/ degrees C and 19.8 +/- 0.8 ms/ degrees C for Hct values of 0.42 and 0.38, respectively. When a head coil transmit/receive setup was used, radiation damping caused a slight reduction (19 ms) of the measured T1 values.
MeSH terms
Funding
- Johns Hopkins University
- National Institutes of Health
- National Institute of Neurological Disorders and Stroke
- National Institute of Biomedical Imaging and Bioengineering
- National Center for Research Resources
How this paper connects to the literature. Drag to explore, click any node to open that paper.
